Embedded Electronic control products

Bean to Cup (fresh brew) Vending Machine Controller

Bean to cup machines are being made using different techniques by different manufacturers. Some use a brewer that is operated by a single motor, some use dual motors, some use 220V AC valves for high pressure lines, some use 24V valves for all etc.. We have made control products for 4 -5 manufacturers and so have covered a wide variety. We can design as per your needs too. User interface ranges from simple buttosn to touch keypads to touch screens to TOUCHFREE solutions.

Electronic control for premix based vending machine

• Can control 2 to 6 canisters
• Have in-built temperature control
• Have Predictive Heating for hot beverages
• Have in-built delay for compressor start-up for cold beverages
• Have separate models for AC (230V AC) and DC (24V DC) loads
• DC models have in-built over current protection

Electronic control for premix based vending machines with 24V DC loads

These are various types of DC vending machine controllers

Electronic control circuit for snack vending machines

• Operates 24V DC motors
• Controls up to 64 products
• 4 line LCD and alpha numeric keypad
• In-built temperature control
• Versatile menu
• Special offers can be configured
• Remote configuration and monitering possible
• Item detector can be attached
• e-payments can be configured
• Touch screen interface can be provided

Mifare Smartcard reader for interfacing with vending machine controller

Our smart card based Vending system helps in controlled dispensing of products among closed user groups such as employees of a company, patients and staff of a hospital etc.. The contactless smart cards can be issued among closed user groups that allow them to use the vending machines for their needs. Other users can be either charged or prevented from using the machines as per requirement. The system is fully developed in-house for some specific large customers in India. Any changes can be accommodated based on numbers.

Electronic control for Product Vending Machines

• These controllers are used in various types of pre-packed product vending machines.
• Some of them are power optimised suitable for being completely operated by battery.
• These can dispense upto four different products.
• Various payment options can be connected.

Electronic control for Dosing Pumps - Pulse Generator

This Controller is suitable for Diaphragm pumps that operate with a 220V DC solenoid. Our controller can give 220V DC pulses at defined pulse rates.

Electronic control for Fish Feeders

This controls the automatic fish feed dispensing machine used in large fish farms in order to supply feed to the full area of the pond uniformly and as per set time table. This board works with 2 motors - one decides the quantity of fish feed flowing and the second motor determines the area in which the feed is dispensed (by centrifugal force).

Solar power running possible with suitable add-on cards

Battery charger for ebikes

We have come up with a wide variety of E Bike Battery Charger Controller. The range of E Bike Battery Charger Controller, made available by us, is designed to ensure full and reliable performance in Indian condition. We have a widely spread distribution network that enables us to make safe and easy delivery of E Bike Battery Charger Controller. We welcome the bulk orders of E Bike Battery Charger Controller.